(Clicking this picture will take you to Conoflow's Home Page)

We have been partners with ITT CONOFLOW  for over 45 years

 

NEW CONOFLOW QUICK MOUNT PANELS
QMP905 Series
ITT Conoflow's Model QMP905 Series of single and two-stage, high-purity panels increases your gas-handling efficiency and maintains the purity of your gas stream. 
NEW CONOFLOW AUTOMATIC CHANGEOVER PANEL
CP220 Series
ITT Conoflow's CP220 Series of Automatic Changeover panels provide a continous supply of gas from a primary and secondary source, assuring uninterrupted flow.  Applications include Gas Chromatography, R&D Facilities, Refineries and Emissions Analysis and Industrial Processes.
CONOFLOW AIRPAK® FILTER REGULATORS 
GFH60/65 Series - Replaced by FR95 Series!
Used to provide clean, regulated air pressure to automatic machinery, instruments and controls, and other pneumatic devices. These units have a maximum supply pressure rating of 300 PSI and are constructed of aluminum. A 35 micron filter comes standard (10 & 40 micron filters optional) and are available in three regulated pressure ranges (0-25, 0-60, 0-125 PSI). It incorporates four ¼” NPT connections and line mounting is standard (optional bracket available for wall mounting).
CONOFLOW AIRPAK® FILTER-REGULATOR IEEE QUALIFIED
25 PSI (172 kPa) / 60 PSI (414 kPa) / 125 PSI (862 kPa)
Qualified in accordance with the requirements of IEEE 323-1974 and the recommended practices of IEEE 323-1975. The testing included Thermal Aging, Radiation Aging, Wear Aging, Seismic Qualification and Steam Line Break Testing. The unit is a pressure reducing, relief type regulator and air filter combination. It provides clean, regulated air pressure to instruments, controls and other pneumatic devices which allows them to operate at maximum efficiency. The unit is supplied with 0-25, 60 and 125 PSI pressure ranges with a maximum supply pressure of 200 PSI.
CONOFLOW MANUAL LOADING REGULATORS AND MANUAL LOADING STATIONS
GH10 / GPH Series
These regulators are precision units designed for laboratory environments, remote loading of pneumatic devices, speed changers and other general purpose applications. The unit is available in brass, aluminum, or stainless steel and combinations of the same. Regulated pressure ranges of 0-3, 5, 15, 25, 35, 50 and 125 PSI. To accurately regulate pressure, the diaphragms incorporate a relief and constant bleed feature. Each unit has two ¼” NPT connections and can be line, wall or flush-back panel mounted.
CONOFLOW ELECTRO-PNEUMATIC TRANSDUCERS
GT210 Series
Miniature I/P-E/P Transducers
These transducers accept a variety of electrical input signals and convert them to proportional pneumatic output signals. The miniature transducer is available with two different circuit boards. One board accepts current inputs of 4-20/10-50mA DC with a range selector jumper switch which can be positioned to accept a 4-20 or 10-50mA DC input. The other board accepts inputs of 0-5/1-9VDC with a range selector jumper switch which can be positioned to accept 0-5 or 1-9 VDC. These units are available with output signals of 3-15, 3-27, or 6-30 PSIG. Optional gauge ports are available for monitoring the output signal.
CONOFLOW ELECTRO-PNEUMATIC TRANSDUCERS
GT_8 Series Milliampere
These Transducers accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27, or 6-30 PSIG. The GT_8 Series also incorporate low impedance circuitry and a range selector jumper which can be positioned to accept 4-20 or 10-50 mA DC inputs. An optional input signal of 0-20 mA is available for the GT_8 series.
CONOFLOW PNEUMATIC PISTON ACTUATORS
GB50 - GB55 Series
Conoflow’s Pneumatic Piston Actuators are compact units designed to function in today’s high performance instrument systems. Piston diameters of 3” to 12.5” are available with standard strokes up to 10”. Force produced is a function of the supply pressure which can be varied from 20 to 100 PSI.
CONOFLOW PNEUMATIC LEVER ACTUATORS
GB52SC - GB53SC Series
Conoflow’s Pneumatic Lever Actuators are rugged and powerful units used to automatically position dampers, louvers, variable pitch fans to make various mechanical adjustments to process machinery. It has a sturdy mounting base and the steel lever arm has eight take-off positions for stroke flexibility. Piston diameters range from 6 to 8” with a maximum lever travel of 12”.
CONOFLOW GJ SERIES POSITIONER
GJ11 and GJ14
Conoflow’s GJ Positioner is a top mounted, integral type unit used with piston, springless diaphragm actuators. Operating on a force balance principle, this unit’s two-stage pilot affords fast response and excellent positioning accuracy. The GJ Series Positioner is available in either top or bottom loading, direct or reverse acting.
CONOFLOW COMMANDAIRE® POSITIONER
GC31 and GC34
Conoflow’s Commandaire® Positioner is a top mounted, integral positioner used with piston or spring and diaphragm actuators. This unit provides proportional positioning if an actuator with stroke lengths up to 10”. The high capacity 5 SCFM at 100 PSI pilot valve exhausts or feeds supply pressure 20 to 100 PSI to the actuator. This positioner can be top or bottom loading, direct or reverse acting.
  WOMED INCORPORATED
921 Stock Street
Pittsburgh, PA 15207

Phone: 412.653.0640
Fax: 412.203.3039     
sales@womed.com